Assembly: IPBYSATO10 iPad Wheelchair Mount
Uploaded on 14 August, 2015
This iPad wheelchair mount attaches right to a chair's frame. Watch as our skilled product experts assemble the bracket with ease!
JEFF (Narrator): "Hey Everyone, I’m Jeff. Today I’m going to show you how to assemble this cool new product we have. It’s a tablet holder that mounts to a wheelchair. Let’s check it out! Here are the components included with this product. First, take the tightening knob and slide it over the end of the bent tube. You may want to hold down the tension release button to help you slide the knob on with ease. Press that same button and then insert it into the end of the bent post into the bottom straight tube until you hear it click in place. Twist the knob until it is secure. You’ll use this knob later to adjust to the desired height. Take the extending arm and insert the treaded portion into this round thing here - fun fact this is called the bushing. The flexibility of this arm is controlled by how tight you secure this second knob. We’ve found the next step is easier with 4 hands so we asked Lauren to help us mount the bracket to the wheelchair frame. Pick your placement on the frame, preferably near the bottom. What we’re trying to do here is to secure both brackets around the frame with nuts and screws. This is the easiest way we’ve found to do it. Put the nut in the back bracket and thread the screw through the front bracket. Use the provided Allen key to hold the nut in place while tightening the screw from the other side with the other Allen key. Leave the first screw a little loose so there’s wiggle room to repeat this step with the remaining 3 screws. Keep doing this until all 4 screws are attached. Then tighten them all until they’re secure. Then, take tablet holder post that you’ve already assembled and insert into the front bracket. You’ll see the corresponding grooves, they fit perfectly together. Tighten the two pieces together with the screw knob. The universal bracket accommodates most tablets ranging from 7 to 10 inches. With a push of the button, the brackets adjust to fit your device securely. Attach the universal tablet holder to the extending arm. Squeezing the two attachment buttons together will allow you to mount the holder right on top. Now you’re ready to tilt, rotate, and adjust this tablet holder to your liking!"