Applying Cling Graphic to Digital Signage

Transcription

Liz: "So to install the decal you will need some water, spray bottle, squeegee, and a nice clean cloth.  To obtain the best adhesion, make sure the surface is nice and clean and dust free.  You want to peel the liner in the back of the graphics.  You want to play with the corner until it lifts.  
You want to be very careful with this material because the surface can crease, and if it does crease it can give you some bubbles that will be very hard to remove.  
I’m going to apply some water right on to the graphics, and a little bit to the surface.
I’m going to center the graphic to the center of the screen.
I’m going to use a rubber squeegee and you want to start from the center out.
With the water underneath, eventually it will dry out, and you will have a nice seamless bubble-free surface."