Assembly Demo: SCT Display Case Series

Transcription

TEXT: "SCT Display Case Series Assembly. 
1. Carefully open the boxes. Find the instructions and set aside. 
2. Remove the pieces from the boxes and lay them out. Find your hardware and set aside. 
3. Lay the rear panel flat. The side with pre-installed hardware should be facing up. Take the right side panel and with the finished side (no screws showing) facing outward, align it with the rear panel. Slide the panel into the groove of the rear panel as shown. Repeat the steps with the left side panel. 
4. Next we’ll install the front panel. With the door lock facing up, align the front panel into the grooves of the left and right panels. Tighten the locking screws as shown. 
5. Carefully stand up display. Install bottom inserts. Install top insert. 
6. Adjust shelf brackets to your designed position. Make sure that they are secured in place by tightening screws. Make sure every bracket has a rubber bumper. 
7. Carefully insert each glass shelf placing securely on the rubber bumpers of shelf brackets. 
8. Wipe down your display. "