Gravitee Repair Kit for Displays2go Exhibit Booth Rentals

Transcription

So all of our rental units come with a repair kit. We want to make sure that you're set up for success on your trade show floor while you're assembling your units. And we just want to prepare for any unforeseen circumstances that could occur. 

So I'm going to walk through the different items that you'll find within your repair kit and what their intended uses are and where they are located on your unit itself. So first, we include extra alignment clips and screws. 

Your alignment clips are located on the sides of your frames right here. So this block and this blue clip are an example of the alignment clips. So as you can see here, we have several different colors of alignment clips included, and the colors are important. 

And best practice would be if you're able to replace the clip that you're moving with the same alignment clip color, because this is going to make assembly so much easier. If there's an event where you actually need to replace your alignment clip and you don't have a matching color, these clips are universal and can be used interchangeably. 

It will not affect the setup or durability of your unit, but it just does make assembly much easier to have the colors remain consistent as it will coordinate with your instructions. Next, we have extra L brackets. The L brackets are located in the corners of your units. 

These provide added strength and durability, and it's going to be a very rare occasion that you're going to need to replace your L brackets and this would only occur if the unit experienced a fall from really high impact type of fall that these might become damaged or shift. 

So we do have extra ones of those, and they, again, remain in the corners of the frame. Next, we have our spring connectors. Again, these are really only going to be used if you have a multi-level unit. These are located right here on the frame. 

And the purpose of these is they connect the gravity panels together from top to bottom. So again, it would only be necessary if you had multi-level units, but we do include four extra. And the next one we're going to talk about is these alignment pins right here. 

So we provide extras of the alignment pins as well. And these are located on the sides of your gravity panel. And these help connect the units together from side to side. And lastly, what I'm going to talk about is these corner protectors. 

So these often get mistaken for trash and can get thrown away from time to time, but they are important when you're disassembling and repacking your unit to have these. So we do want to include extras. 

What you're going to do is you're going to place these in the corners of your frame. And what these do is they protect your unit so that you can stack multiple frames on top of each other to minimize the amount of damage that can occur in transit and keep your units from jostling as much within the crate. 

So these are important so they don't fall together or damage each other. So again, these are your corner protectors, and that's what makes up your repair kit. So hopefully we have everything in there for you. 

If you run into any circumstances at your event, we want to make sure you have backups, so you can be set up for success. And I hope this video is helpful.