How to Replace a Gravitee Clip on Your Modular Inline Exhibit Gravitee™ One-Step System

Transcription

Today, I'm going to walk you through how to replace the alignment eclipse on your gravity frame in the unlikely event that the eclipse become loose or get jostled around during transport. The best practice here is, if you can, to replace the colored clip with the same color as possible. 

But if that's not an option, the clips are universal and can be used interchangeably. So you're going to need a Phillips head screwdriver. And you'll want to remove the two screws that are located on each end of the clip. 

Once the screw's removed, you're just going to want to give it a little wiggle to get the clip out of place as it's firmly placed within there. So in the repair kit that you're going to receive with your gravity unit, they'll be extra clips. So you'll just want to grab one of those. And like I said, the same color, if possible. 

So you'll want to put it back on the frame. And these little divots within the clip, you just want to be lined up where the screw holes are within the aluminum frame. So it just might take some kind of finessing to get that in the right place. 

You want to firmly press it down, and then we'll just add the screws back into place. And there you have it. That's super simple. That's how you replace your clip. Just take some just a little power and technique to just get it perfectly lined up, and you'll be good to go.