LED Video Wall with Ultra-Wide Viewing Angle, 4K Pixel Resolution, and Direct View LED

Transcription

LED Video Wall How To Install.  
Packing List
Step 1- Measure: Measure the wall to mark the pilot holes for the wall mounting brackets.
Step 2 – Install Wall Brackets: Install the 4 metal wall brackets from the kit vertically to the wall.
Step 3 – Assemble Cabinets: Connect the first row of cabinets together.
Tip: Make sure the arrows on the cabinets are all pointing in the same direction.
Step 4 – Attach Row: Attach the row of cabinets to the wall mounting brackets using the cylindrical head screws.
Place and secure the metal connectors behind the cabinet in the shown locations for added rigidity once mounted to the wall.
Step 5 – Install Row of Cabinets: Repeat steps 3 and 4 to create another row of cabinets to be installed to the wall mounting brackets.
Insert the dowel pins to the bottom row into the dowel hole of the installed row.
Step 6 – Connect Power: Insert the power cables as follows, going upwards in each cabinet, starting from the bottom.
Step 7 – Connect Network: Insert the ethernet cables into the network cable holes as shown.
Begin at the bottom right cabinet and follow the path of the arrows shown to complete the circuit.
Tip: Make sure the cables lie flat to make step 8 easier.
Step 8 – Connect LED Modules: Carefully attach each LED module to each cabinet. Adjust modules as needed to keep gaps between them even.
Tip: Make sure the arrows on the LED modules are facing the same direction as the cabinets.
Step 9 – Connect Controller: Connect the main network cable to the controller via the LED OUT ports. Connect the power and plug in the Wi-Fi antenna.
Now you’re ready to boost your brand, captivate your audience, and leave a lasting impression with this 108” LED video wall.
Professional installation services offered.
Think Big. Think Bold. Go Digital.